| Vehicle generation |
2007–2011 |
The replacement must match the first-generation body design in this range. |
Manual or power adjustment; heated function may depend on trim and market. |
High if a later-generation housing is selected. |
Compare mounting points, door-side shape, connector position, and mirror outline. |
| Vehicle generation |
2012–2017 |
Confirm the mirror is designed for the second-generation body shape in this range. |
Power adjustment, optional heating, turn-signal lamp, and blind-spot-related equipment on selected versions. |
High when trim-level wiring is ignored. |
Use the original mirror's connector count and wire functions as the baseline. |
| Vehicle generation |
2018–2024 |
Confirm the replacement matches the third-generation body platform and exact trim equipment. |
Power adjustment, available heating, available turn-signal indicator, and available blind-spot warning indicator. |
Very high for mirrors with different sensors or connectors. |
Match the original connector, indicator location, glass markings, and mounting base. |
| Vehicle generation |
2025–2026 |
Verify the latest body design, market specification, trim level, and hybrid-equipment configuration where applicable. |
Power adjustment, possible heating, signal indication, and driver-assistance-related mirror functions depending on configuration. |
Very high because newer trim wiring may differ. |
Verify by vehicle identification number, original-part reference, connector photograph, and side designation. |
| Mirror glass |
All model-year groups |
Check left or right side, convex or flat profile, backing-plate clips, and glass perimeter. |
Flat glass, convex glass, heated glass, or glass with an integrated warning indicator. |
Incorrect curvature can distort distance judgment. |
Compare the glass shape and rear clip pattern with the removed component before installation. |
| Mirror housing |
All model-year groups |
Confirm door mounting studs, gasket shape, folding direction, cap profile, and camera or lamp openings. |
Textured black, painted finish, signal-lamp opening, or driver-assistance indicator opening. |
A visually similar housing may not bolt on correctly. |
Measure the mounting triangle and compare the number and position of studs. |
| Wiring and connector |
All model-year groups |
Match connector shape, terminal count, wire arrangement, and available electrical functions. |
Two-way adjustment, heating circuit, turn signal, courtesy lamp, folding motor, or warning indicator. |
A connector that plugs in may still have different pin assignments. |
Check a wiring diagram or test each circuit before final assembly. |
| Side designation |
All model-year groups |
Confirm driver-side or passenger-side placement and the vehicle's steering configuration. |
Left-hand-drive and right-hand-drive applications may use different glass curvature or visibility angles. |
The wrong side cannot be corrected through adjustment. |
Match the side marking and compare the viewing angle with the original mirror. |
| Safety features |
Trim-dependent |
Determine whether the original assembly includes a blind-spot warning indicator, heating, or other driver-assistance hardware. |
Integrated warning lamp, heated surface, calibrated convex glass, and approved reflective markings. |
Removing a safety indicator may reduce driver awareness. |
Do not replace a safety-equipped mirror with a lower-specification assembly without confirming system compatibility. |
| Adjustment and folding |
Trim-dependent |
Confirm manual or electric adjustment and manual, spring-fold, or power-fold operation. |
Manual glass adjustment, electric adjustment, manual folding, or power folding. |
A power-fold motor requires suitable wiring and control signals. |
Test movement in every direction and confirm the housing folds without contacting the door. |
| Final fitment validation |
Before purchase and installation |
Use the vehicle identification number, production year, trim, side, connector image, and original-part reference together. |
Exact body style, correct functions, correct mounting hardware, and matching electrical configuration. |
Year-only matching is insufficient for many mirror assemblies. |
After installation, verify adjustment, heating, indicators, warning functions, folding, and visibility. |