Base Power Mirror for Toyota Tacoma 2025+ (Fourth Generation) | JWZ-A-108 | Mid-Size Pickup Fitment
| Applicable Models | Year | Model | Linear Algebra | Function | |
| FOR TACOMA | 2025- | JWZ-A-108 | / | / | / |
The 2025+ Toyota Tacoma marks the fourth generation of America’s best‑selling mid‑size pickup. While higher trims (TRD Pro, Trailhunter, Limited) will offer power folding, heating, blind spot monitoring, and off‑road cameras, the base SR and SR5 models require a simpler, more affordable mirror. The JWZ‑A‑108 is our preliminary replacement for these entry‑level configurations.
Vehicle Context. The new Tacoma is built on Toyota’s TNGA‑F global truck platform, sharing architecture with the Land Cruiser 250 and HiLux. However, its mirror design is unique to the Tacoma: the housing is 15% smaller than the Tundra’s, with a trapezoidal shape that integrates into the door’s beltline. The door mounting flange uses a revised three‑bolt pattern with 8mm studs (down from 10mm on the Tundra).
Expected Features (Base Trim). Based on prototype validation and Toyota’s typical base specifications, the JWZ‑A‑108 is expected to include:
Power electric adjustment – manual fold only (no folding motor)
Manual fold inward – for parking, car washes, and narrow trails
No heating element – base trims omit defrost (optional on SR5 Convenience Package)
No LED turn signal – turn signals remain on the fender (as on previous Tacoma base models)
No blind spot monitoring or camera
The glass will be convex on the passenger side and flat on the driver side, with a hydrophobic coating for rain visibility.
Construction for Mid‑Size Duty. The housing is molded from glass‑filled nylon (20% glass fiber) – lighter than the Tundra’s but still impact‑resistant enough for brush and trail debris. The manual fold joint is spring‑loaded with a 14 Nm detent, designed to stay put on rough roads yet fold easily when pushed. A rubber seal around the base prevents dust and water ingress (IP6X). Operating temperature range: -30°C to +80°C.
Pre‑Release Status. Because the 2025+ Tacoma is a new platform with ongoing production ramp‑up, final mirror specifications may vary by build date and market (US, Canada, Mexico). We are actively validating the JWZ‑A‑108 against multiple VIN samples. We recommend:
If you need a replacement now: Contact us with your VIN – we will check if a pre‑production sample is available for your exact trim and build date.
If you can wait: We will update this listing once final connector type, pinout, and feature set are confirmed (expected Q4 2026).
Installation Preview. Once finalized, installation will involve:
Removing the door panel (new clip design – 2 screws + 7 clips)
Unbolting the three 8mm nuts (use a deep socket with a 6‑inch extension for the lower nut)
Disconnecting the factory harness (expected 3‑pin or 5‑pin connector)
Reversing the process
We will provide a full PDF guide and a video link upon product release.
Aftermarket Potential. The Tacoma has one of the largest off‑road aftermarket communities. For owners upgrading from a damaged base mirror to a higher‑spec unit (e.g., adding factory‑style folding or BSM), we offer retrofit kits. Contact us for compatibility.














